Our range of premium quality Coolant Filtration System, are used for machining operation in varied industries like steel, automobiles, bearing, etc. These filters work on a very simple approach and hence are user friendly. They are easy to maintain. These products offer continuous filtration therefore avoiding shut down of machines for periodical cleaning.
Extraordinary Magnetic Separator FEATURES
Uses rare earth magnets which provide upto 8 times the magnetic force of conventional ferrite magnets.
No consumables required. Dry cake discharge.
Superior contamination removal means improved surface finish, increased life of grinding wheel, reduced dressing frequency, increased life of fluid.
Electrostatic Liquid cleaning machine involves static charging of ionized suspended solid contaminants in oils and collecting them on enormously spread surface of die-electric media. The unique system like Liquid cleaning equipment complements & enhances the usable life of oil & mechanical filters. These cleaning equipment are used to improve the precision of machine components like servo valves, pumps and sliding mechanisms. We offer various models of electrostatic liquid cleaning equipments to suit different requirements of the customers.
Working KLEENTEK FERROCARE ELC uses the principle of "Electrostatics" to separate and collect fluid contaminants. "Electrostatic" force applies to all particles and they migrate to 'positive' or 'negative' electrodes. Maximum collection occurs at the pleated edges of 'collectors', where the intensity of the deformed electric field is strongest. In the ELC this force is created by a special transformer which charges two sets of SS electrodes, one 'positive1, one 'negative'. As the fluid flows freely through the system, the ELC removes suspended impurities, down to sub-micron levels. Sludge and varnish are also removed, which are not 'seen' as particles by filters. Theoretically, even particles below 0.01 u can be removed.
Electrostatic forces remove all types of particles such as metal wear, paper, wood, plastic and rubber. Just like a comb rubbed on dry hair will pick them up.
Operating conditions - Mineral base oils, except IC engine oil - Maximum moisture content 500 ppm - Maximum temperature 60 DegreeC - Special specification available for synthetic oils - Standard power source 4l5v 30 50Hz
The Ferrocare's low vacuum dehydration unit is a comprehensive process to remove water and gases from oil at temperature lower than 53 Degree C, which reduces oxidation during the dehydration process. The LVDH-50 is a quick, inexpensive and automatic system that overcomes centrifuging's major drawbacks and especially that of oxidation and emulsified water retention. Some of its technical features are
Totally automatic operation
Reduces water content in a single pass by 0.25% - 1.5% depending on inlet oil temperature
Ultimate water removal through oil recirculation - to zero-free water content or to 50 % below saturation level
Removal of soluble gases and air - to 50% of saturation level
refrigerated type condenser
7 Kwh @ 415 volts 3Ph, 50 Hz
Note-Larger Capacity vacuum dehydrators are available on request. Additional Information:
Industry: Steel,Power,Cement,Heavy Engg,Automotive,Ports,& Shipping Industry
We offer our customer these Hydraulic Gear Box Oil Filtration System which are very beneficial for removing the contamination from gear boxes. With its facilities to get attached directly to the gearbox it helps to remove carbon deposits more efficiently.